Changing The Master Code - Simu DIGICODE HZ 2C Guia De Instalacion

DIGICODE HZ 2C

Changing the master code

1
NOTICE
Before initial commissioning or after a keypad reset, the master code is 0000.
1. Enter the master code in use
2. Press button S until the indicator lights come on.
3. Enter the code of your choice (from 4 to 6 digits) and confirm by pressing S.
ð The indicator lights go out then come on.
4. Enter the code again and confirm by pressing S.
The indicator lights go out.
ð
©
Copyright
2022 SIMU SAS. All rights reserved.
2 3 4
21