Infiniton FG-BB150 Manual De Instrucciones página 18

COUPLING OF THE PANELS OF THE BUILT-IN COLUMN
OF THE APPLIANCE DOORS
The appliance is equipped with coupling devices for the appliance doors with
the column panels (loader slide).
PRECAUTIONS FOR THE CORRECT
OPERATION
Once the product has been embedded, place the rear part of the column in
contact with the wall so as to prevent access to the compressor
compartment.
For the product to operate correctly it is essential to allow adequate air
circulation so as to cool down the condenser located in the rear part of the
appliance.
For this reason, the column must be equipped with a rear chimney, whose
upper opening must not be blocked and with a front slot which will be
covered with a ventilation grill.
SUSPENDING USE OF THE APPLIANCE
If the appliance is not to be used for a long time:
1) Turn the appliance OFF (see Operation).
2) Extract the plug or remove the safety device.
3) Clean the appliance
4) Leave the doors of the appliance open.