RULES FOR SAFE OPERATION
12. ALWAYS USE SAFETY ACCESSORIES.
Safety glasses and earmuffs should always
be worn. Everyday eyeglasses have impact
resistant lenses only, they are not safety
glasses. A face or dust mask is also required if
dust is going to be created.
13. DON'T OVERREACH. Keep proper footing
and balance at all times. Do not use tool on a
ladder or unstable support. Secure tools when
working at elevated levels.
14. MAINTAIN TOOLS WlTH CARE. Keep
tools sharp and clean for better and safer
performance, Follow instructions for lubricating
and changing accessories. lnspect tool cords
periodically and, if damaged have them repaired
by an authorised service facility. lnspect
extension cords periodically and replace them
if damaged. Keep tool handles dry, clean and
free from oil and grease. Never use brake
fluids, gasoline, petroleum based products, or
any strong solvents to clean your tools.
15.
REMOVE
ADJUSTING
WRENCHES. Check to see that keys and
adjusting wrenches are removed from the tool
before switching it on.
16. STAY ALERT AND EXERCISE CONTROL.
Watch what you are doing and use common
sense. Do not operate a tool when you are
tired. Do not rush.
WARNING:
lf using an extens,on lead ensure that the male and female plug connection is
elevated and out of the way of any water contact
17. CHECK DAMAGED PARTS. Before using
a tool, check that there no damaged parts. lf
a part is damaged, carefully determine if it
will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
proper mounting and any other conditions
that may affect the operation of the tool. A part
that is damaged should be properly repaired
or replaced by an authorised service centre,
unless otherwise indicated in this Owner's
Operating Manual. Defective switches must be
replaced by an authorised service centre. Do
not use a tool if the switch does not turn the tool
on and off correctly.
18. USE ONLY APPROVED PARTS. When
servicing, use only identical replacement
parts. Use an authorised service centre to fit
replacement parts.
19. DO NOT OPERATE THIS TOOL WHILE
UNDER
KEYS
AND
ALCOHOL OR ANY MEDICATION.
20. OUTDOOR USE EXTENSION CORDS.
When the tool is used outdoors, use only
extension cords intended for use outdoor and
so marked.
THE
INFLUENCE
OF
DRUGS,
5