Promaker PRO-TP850KIT Manual De Usuario página 7

OPERATION
AUXILIARY HANDLE AND DEPTH STOP
lnstall the auxiliary handle en the head of the
housing and insert the depth stop in the hole
provided. The auxiliary handle can swivel 360'
for the most comfortable position and easiest
operation. The depth stop helps keep an
accurate depth when drilling holes.
MOUNTING OF THE DRILL BIT
When mounting the drill bit, insert the bit
into the chuck as far as it will ge and tighten
securely using the chuck key provided. There
are three holes in which the chuck key should
be insertad. Tighten them equally and turn at
each of the three holes, not just at one hole.
The bit can be removed by reversing the above
procedure.
(Flg.1)
SWITCHES (Fig.2)
Your drill starts and stops by squeezing and
releasing the trigger switch. For continuous
operation, press the lock on button while the
trigger switch is fully depressed. To release the
lock, squeeze the trigger switch again.
FORWARD REVERSE SWITCH (Fig.3)
Your drill is fitted with a forward reverse lever
which allows the removal of screws.
• lnstall screws: situate the lever in the
"FORWARD ROTATION" side indicated en
your drill.
• Remove screws: situate the lever in the
"REVERSE ROTATION" side indicated en your
drill.
Lock On button
Trigger switch
FORWARD ROTATION
REVERSE ROTATION
7