SFaudio SFF50 Manual De Usuario página 11

Maquina de niebla profesional
Ocultar thumbs Ver también para SFF50:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

There six buttons( FUNCTION, UP, DOWN, TIMER, MANUAL) on the rear panel:
FUNCTION
UP
DOWN
TIMER
VOLUME
MANUAL
Function 1: Fan speed:
Press function button 1 time, it will show "Fan speed....%". This is for setting up how many percent fan
output. For example: "Fan speed.... 50%": it means fan output at 50%.
You can set up the fog output by the button "UP/DOWN".
Function 2: Haze volume ouput:
Press function button 2 times, it will show "Volume output ....%". This is for setting up
how many percent fog output when no use "timer mode" . For example: "Volume Output 50%": it
means fog output at 50%. You can set up the fog output by the button "UP/DOWN". After setting, you
can press VOLUME button to start the fog output.
Function 3: DMX Address setting
Press function button 6 times, it will show "DMX512 Add...". This is for setting up the DMX Address. You
can set up the DMX Address by the button "UP/DOWN".
Press the button will shows 6 settings.
You can operate the 6 settings separately by "UP/DOWN"
You can operate the 6 setting s DOWN eparately by
"UP/DOWN"
After you set up the timer mode by "FUNCTION" button,
please press the button to let the timer mode working.
Press this button to let the fog machine working on, press
again to stop
1. This is manual fog output, press this button when you
need to control the fog output by hand only. It will stop
working when your hand leaving.
2. When fluid-less protection working on, please refill the
fog fluid into the tank. After this operation, please press the
MANUAL button until the fog output happened to make
the fluid-less protection off.

Publicidad

Tabla de contenido
loading

Productos relacionados para SFaudio SFF50

Tabla de contenido