Timer Mode - SFaudio SFF50 Manual De Usuario

Function 4: Timer mode:
After set up following steps, you can press the button "TIMER" to let the timer mode working on:

Timer mode

DMX
When in DMX mode there are two channels with the following function:
DMX Channel
Ch1
Ch2
For more new products, please kindly contact www.sfaudio.es.
Work with SFAUDIO, more solid, more reliable products are always waiting for you!
Press function button 3 times, it will show "Interval
Set....S". This is for setting up the interval fog output.
Interval
For example: " Interval Set 50S": it means it will stop working for
setting
50 seconds, after 50 seconds, it will working on again...You can
set up the interval fog output by the button "UP/DOWN".
Press function button 4 times: "Duration Set...S".This
is for setting up the continuous fog output. For
example: " Duration Set. 20S": it means it will be
Duration
setting
continuous working for 20 seconds, after 20 seconds,
it will enter "Interval Set time" ..You can set up the
Duration (continuous fog) output by the button
Press function button 5 times: "Timer out...%" or: "Nonstop
Burst". This means: How many percent fog out under timer
mode condition, for example: "Timer out 50%", this means: fog
Timer output
output 50% only useful under the timer mode. You can set up
1-100%
the fog output by the button "UP/DOWN". When display shows
"Nonstop Burst", that means 100% output, and nonstop fog
output.
DMX Scale
0-255
0-255
Function
0%-100% Fan Speed
0%-100% Fan Speed