Descargar Imprimir esta página

Configuration Options - Bellman & Symfon Maxi Pro BE2021 Manual De Usuario

Ocultar thumbs Ver también para Maxi Pro BE2021:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
If you encounter other problems with your
device, contact the point of purchase, your
local Bellman & Symfon office or the manu-
bellman.com
facturer. Visit
for contact info.
Rechargeable batteries should be charged
fully before using the device for the first
time. Only charge batteries in a temperature
between 0°– 35° C, 32°– 95° F.
Rechargeable batteries should only be

Configuration options

These devices can be configured with the following original accessories:
BE9122 Stereo headphones, black
BE9124 In-ear stereo earphones, black
BE9233 Headset with microphone, black
BE9229 Earphones with mic. black
BE9159 Neck loop, 90 cm cable, black
For detailed product information, see the corresponding instructions for use.
Operating conditions
Operate the device in a dry environment within the temperature and humidity limits stated in this
leaflet. If the device gets wet or is exposed to moisture, it should no longer be regarded as reliable
and should therefore be replaced.
Cleaning
Disconnect all cables before you clean your device. Use a soft, lint-free cloth. Avoid getting moisture
in openings. Do not use household cleaners, aerosol sprays, solvents, alcohol, ammonia or abrasives.
This device does not require sterilization.
Service and support
If the device appears to be damaged or doesn't function properly, follow the instructions in this
booklet. If the product still doesn't function as intended, contact your local hearing care professional
for information on service and warranty.
Warranty conditions
Bellman & Symfon guarantees this product for two (2) years from date of purchase against any
defects that are due to faulty materials or workmanship.
This guarantee only applies to normal conditions of use and service, and does not include damage
resulting from accident, neglect, misuse, unauthorized dismantling, or contamination howsoever
caused. This guarantee excludes incidental and consequential damage. Furthermore, the warranty
does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.
This warranty gives you specific legal rights and you may also have other rights that vary with
territory. Some countries or jurisdictions do not allow the limitation or exclusion of incidental or con-
sequential damages, or limitations on how long an implied warranty lasts, so the above limitation
may not apply to you. This guarantee is in addition to your statutory rights as a consumer. The above
warranty may not be altered except in writing signed by both parties hereto.
Compliance information
Hereby Bellman & Symfon declares that, in Europe, this product is in compliance with the essential
requirements of the Medical Device Regulation EU 2017/745 as well as the directives and regulations
24
changed by Bellman & Symfon or an
authorized service center. There is a risk of
explosion if the batteries are not replaced
correctly.
Do not use the device in areas where elec-
tronic equipment is prohibited.
This device should not be used on aircrafts
unless specifically permitted by flight
personnel.
BE9161 Neck loop, 15 cm cable, black
BE9254 Single charger cord, white
Power adapter, white
EU/UK plug, white
listed below. The full text of the declaration of conformity can be obtained from Bellman & Symfon
or your local Bellman & Symfon representative. Visit
Radio Equipment Directive (RED)
Medical Device Regulation (MDR)
EC Battery Directive
Regulatory symbols
With this symbol, Bellman & Symfon confirms that the product meets the Medical Device
Regulation EU 2017/745.
This symbol indicates the manufacturer's serial number so that a specific medical device
can be identified. It's available on the product and gift box.
This symbol indicates the manufacturer's catalogue number so that the medical device can
be identified. It's available on the product and gift box.
This symbol indicates the medical device manufacturer, as defined in EU Directives 90/385/
EEC, 93/42/EEC and 98/79/EC.
This symbol indicates that the user should consult the instructions for use.
This symbol indicates that it is important for the user to pay attention to the relevant
warning notices in the user guides.
This symbol indicates important information for handling and product safety.
Temperature during transport and storage: –10° to 50° C, 14° to 122° F
Temperature during operation: 0° to 35° C, 32° to 95° F
Humidity during transportation and storage: <90%, non-condensing
Humidity during operation: 15% to 90%, non-condensing
Atmospheric pressure during operation, transportation and storage:
700hpa to 1060hpa
This device is designed such that it functions without problems or restrictions if used as
Operating
conditions
intended, unless otherwise noted in the instructions for use.
With this CE symbol, Bellman & Symfon confirms that the product meets EU standards
for health, safety, and environmental protection as well as the Radio Equipment Directive
2014/53/EU.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Bellman & Symfon is under license. Other trademarks and
trade names are those of their respective owners.
This symbol indicates that the product shall not be treated as household waste. Please
hand over your old or unused product to the applicable collection point for the recycling of
electrical and electronic equipment.
bellman.com
for contact information.
REACH Regulation
Restriction of Hazardous Substances Directive (RoHS)
Waste Electrical & Electronic Equipment (WEEE)
EN
25

Publicidad

loading

Productos relacionados para Bellman & Symfon Maxi Pro BE2021