Maintenance; Cleaning After Use; Storage; Appendix - Sublue H1 Manual Del Usuario

Maintenance

1

Cleaning After Use

1. After using the waterproof case in seawater, close the seal cap, thoroughly
clean the case with fresh water, and soak in fresh water for 20 minutes to
avoid salt and other impurities from corroding the metal parts. Afterward, wipe
the surface of the waterproof case with a soft dust-free cloth and place it in a
cool and dry place to air dry.
2. If the inside of the waterproof case is accidentally soiled during use, you can
wrap it with the wipe cloth around the wipe stick in the product. .
3. Do not use any chemical cleaning products, such as soap or laundry
detergent, to clean the case.
4. Be sure to perform the above cleaning procedure after each use of the

waterproof case.

2

Storage

If you do not expect to use the product for some time, place the case in the
storage bag by following these instructions:
1. Keep the product in a cool and ventilated place with a temperature between
0°C and 45°C.
2. Avoid keeping this product in a poorly ventilated place or an environment with
over 75% humidity.
3. Keep away from high temperature, fire, and reach of children.
4. Do not place any heavy objects on top of the case.
5. During long time storage, do not tighten the seal cap knob and ensure the
seal cap is not locked in place.
6. The Bluetooth controller comes with a lithium battery. Therefore, do not place
t h e w a t e r p r o o f c a s e i n d i r e c t s u n l i g h t a n d k e e p i t a w a y f r o m
high-temperature objects such as microwaves and ovens.
7. Check the controller battery at least once every 3 months and keep it charged
to at least 50% battery.
10

Appendix

Specifications
Water-resistance level 10m / 33ft (IPX8)
Supported phone dimensions* 165 mm×79 mm×10 mm(length×width×thickness)
Dimensions (with controller) 236 mm×107mm×41mm(length×width×thickness)
Weight (with controller) 375g
Main materials Bio-based PC, silicone rubber
Case transmittance 92%
Bluetooth BLE5.0
Photo resolution 1920×1080 (16:9)
Video resolution 1920×1080@30fps
Battery specifications Built-in rechargeable lithium battery 3.7 V/180mAh
Battery duration 8h
≤3h
Charge time
Charge voltage 5V
Charge current 90mA
Working temperature 0
°C
Storage temperature 0
°C
* These dimensions represent the maximum dimensions of compatible mobile phones.
Note that if your phone has a pop-out front camera that exceeds these dimensions, it will
not be able to pop out normally.
-40
°C
-45
°C
EN
11