Incoming Call; Call Transfer - Vieta Car VC-HU710BT Manual De Usuario

- The LCD Display will displayed "
during the connecting period.
- If the Re-Connection is successful, the LCD
Display will be display "
And the unit will switch back to the previous mode
automatically.
- If the Re-Connection is failed, the LCD Display will
be display "
switch back to the previous mode automatically.
The unit will make Auto Re-Connection under the
below condition.
Every time turn the ignition key from off to on, the unit
will Auto reconnect with the Mobile Phone.
Dis-Connection of the Bluetooth System
The unit have the below optional function for user to
disconnect the Bluetooth system with the unit. The
unit can be Dis-connected by the following methods.
- Access into System Menu - DIS-CONN mode to
activate the manual Dis-Connection.
NOTE: Please refer System Menu Setting for more
details of how to access into System Menu mode.
- Once the "
on the LCD, press the AUDIO button to activate the
manual Dis-Connect mode.
- If the Dis-Connection is successful, the LCD
Display will display "
And the unit will switch back to the previous mode
automatically.

INCOMING CALL

Answering An Incoming Call
- When there is an incoming call, the display will
display the Phone Number. If the incoming call has
no caller number,
the LCD will display
short press the button to accept the call.
NOTE:
- Always press the button to answer / accept
the call after the LCD display the " Incoming caller
telephone number ".
- The audio output of the present mode will be muted
and the ringing tones will be heard, if an incoming
call is not being answered.
- User can use the Encoder Volume Knob to adjust
the volume level.
- To end the conversation, press the
The unit will switch back to the previous mode
22
"
".
" . And the unit will
" is displayed
".
user can
button.
automatically and release the mute of the previous
mode at the same time.
Rejecting An Incoming Call
- User can press button to reject the incoming
call.
NOTE: The audio output of the present mode will
be muted and the ringing tones will be heard if an
incoming call is not being answered. After prseeing
the button, the mute of the present mode will
be released.
OUTGOING CALL
Making An Outgoing Call
- User can use his / her Mobile Phone to dial and
make an outgoing call.
Once the user has completed the dialling, the display
should show "
NOTE: The audio output of the present mode will
ONLY be muted after pressing
confirmation to dial the outgoing call.
- During the talking mode, the LCD Display will
display the duration "
conversation.
- User can use the Encoder Volume Knob to adjust
the volume level.
- To end the conversation, press the
The unit will switch back to the previous mode
automatically. The mute of the previous mode will be
released at the same time.

CALL TRANSFER

To Audio Transfer From Head Unit Back To
The Mobile Phone
- During the talking mode, user can long press
the button to transfer the audio from the unit back
to the Mobile Phone for privacy reason. The LCD
Display will display "
for 3 seconds.
NOTE:
- When making an outgoing call, it's not possible to
CALL TRANSFER if the call is not being answered
yet. It's only possible to Transfer the call to Mobile
Phone after the call is being answered.
Depending on different type of Mobile Phone, the
time need for activating the CALL TRANSFER mode
is different. Like Nokia Mobile Phone usually takes
3-5 seconds after long pressed the
audio transfer back or forth through Unit to Mobile
Phone.
".
the button as a
" of the
button.
" on the LCD
button for
USB/SD Radio