Publicidad
O R I G I N A L I N S T R U C T I O N
4.2 MANDREL COLLECTOR
The purpose of the mandrel collector is to collect the rest
mandrel. The collector can be placed in three positions.
A
Position/remove.
B
Lock – without extraction. Tilting the tools will make sure that
the mandrel will end up in the collector.
C
Lock – with extraction. The rest mandrel is automatically
blown into the collector.
4.3 REVOLVABLE AIR OUTLET
The escaping airfl ow can be set using the revolvable air outlet (A)
such, that people experience a minimum of discomfort during
work.
Do not remove this air outlet from the mandrel collector.
4.4 360° REVOLVABLE AIR SUPPLY UNIT
When the air hose (A) causes discomfort during work, turn off
closing valve (B). After this the 360º revolvable unit (C) can be
turned into any required position.
E N G L I S H
9
Publicidad
Solución de problemas
