Yamaha SR-C30A Guia De Incio Rapida página 6

Connecting a TV
Connect a TV to the sound bar. Select the connection procedure
according to the function to be used. The differences depending on
the connection procedure are as follows:
Function and connection procedure
HDMI Control
function
Digital optical
audio cable
(included)
−
O
HDMI cable
(commercially

available)
HDMI
1)
The HDMI Control function allows the sound bar to be controlled using the
TV's remote control. The following functions can be controlled using the
TV's remote control:
- Turn the power on and off
Both the TV and the sound bar turn on/off at the same time.
- Volume adjustment
The sound bar's volume can be adjusted when the TV's audio output is
set to the sound bar.
2)
When connecting to an HDMI input jack not compatible with ARC, connect
with both an HDMI cable and a digital optical audio cable.
 NOTE
• The type and quality of the TV audio signal transmitted by either the
digital optical audio cable or the HDMI cable is the same.
6
En
Jack of TV to
Connection procedure
1)
connect to
Digital optical
"Connecting a TV using
audio output
jack the digital optical audio
cable (included)" (on the
right)
HDMI input
"Connecting a TV using an
jack (ARC
HDMI cable (commercially
2)
compatible )
available)" (on the next
page)
Connecting a TV using the digital optical
audio cable (included)
The TV's audio signal is transmitted to the sound bar when the sound
bar is connected to a TV using the included digital optical audio cable.
The HDMI Control function that controls the sound bar using a TV's
remote control cannot be used.
TV
1. Remove the cap.
2. Check the orientation
of the plug.
Sound bar (rear)
 NOTE
• Connect AV devices (such as BD/DVD players and set top boxes) to
the TV's HDMI input jacks.
OPTICAL
Digital optical audio
output jack
O
TV audio signal
O
TV jack