Features - Hart HLED01 Manual Del Operador

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
n o
No Load Speed
Per Minute
.../min
Volts
V
Hertz
Hz
Minutes
min

FEATURES

PRODUCT SPECIFICATIONS
Motor . .................................................................................................................................................................... 40 Volts DC
Blade Length .................................................................................................................................................................. 8.5 in.
Edging Depth............................................................................................................................Adjustable from 1/2 in. to 2 in.
KNOW YOUR PRODUCT
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DEPTH ADJUSTMENT KNOB
The depth adjustment knob allows user to control the depth
of cut. Adjust the blade depth from 1/2 in. to 2 in.
NAME
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Voltage
Frequency (cycles per second)
Time
6 – English
DESIGNATION/EXPLANATION
DROP WHEEL LEVER
The drop wheel adjustment lever enables edging at multi
level areas like curbs.
EDGE GUIDE LEVER
The edge guide lever controls the depth of the edge guard.
GUARD SWEEP
The guard sweep removes clippings and debris from the
blade area.
LOCK-OUT
The lock-out prevents accidental starting.