Components; Warnings - Sagola 6110 Manual De Instrucciones

05. Components

1 Body of the tank
2 Lid
3 Fluid outlet ball valve
4 Manual remover handle
5 Air inlet
6 Pressure regulator (gun)
7 Pressure regulator (pressure pot)
8 Security Valve
9 Clamp
9
8
652/653 INOX

06. Warnings

It is advisable to read all the instructions indicated below carefully.
Before putting the unit into operation, and especially after each cleaning and/or repair opera-
tion, a check must be made that the pressure pot components are securely tightened and that
the air and/or product hoses are airtight (no air leaks). Faulty parts must be replaced or repaired
as appropriate.
Check that the unit's safety devices work properly before using it.
Ensure that the products to be applied are chemically compatible with
the components these come into contact with (aluminium, stainless
steel, polythene and acetylene resin).
Do not use corrosive or abrasive products.
The unit is easy to handle thanks to its design and the simplicity of its mechanisms. Use it accor-
ding to the operating, maintenance and safety instructions indicated in this manual and follow
the application methods indicated to obtain the required finish quality.
6
7
5
3
6110 INOX
ENGLISH
3
2
4
9
1
Fig.01
6110 INOX