Product Overview - PROZIS Pix-E Avant Manual Del Usuario

Maintenance and cleaning
• Switch off the projector and remove all plugs at least 30 minutes before cleaning.
• Clean the device with a dry, clean cloth. Do not use any chemical or abrasive cleaning
agents.
• Do not use sharp objects, nails or brushes.
• Clean the lens with lens cleaning paper. Do not use any chemical cleaning agents as they
may damage the len's coating film.
Storage
• When not using the device for long periods of time, store it away from heat, humidity, direct
sunlight, and electromagnetic radiation.
• Rechargeable batteries need to be cycled for maximum performance and longer battery
life. If you don't use the projector that often, make sure to recharge the battery regularly in
order to keep it working properly.

PRODUCT OVERVIEW:

Control Panel Buttons: see page 2, figure 1
A. Volume
B. Home
C. Back
D. Menu
INSTRUCTIONS
How to use:
Front projector view: see page 2, figure 3
1. Focus wheel
Turn the focus wheel to adjust the image focus.
2. Power Button
Press and hold this button for 5 seconds to switch the projector on or off.
3. MicroSD™ Slot
This slot allows you to insert a microSD™ card, giving you access to your files directly from
the projector.
Rear projector view: see page 2, figure 4
4. and 5. USB Input / Power Out
This port allows you to connect a USB flash drive or another external device to the projector. It
also allows you to use the projector to charge a mobile device.
EN
6