Assembly; Checking Scope Of Delivery; The Workplace; Electrical Connection - Zipper Maschinen ZI-WP700TN Instrucciones De Servicio

Ocultar thumbs Ver también para ZI-WP700TN:

Idiomas disponibles

14 ASSEMBLY

Check the machine immediately after delivery for transport damage and missing parts.

Choose a suitable place for the machine. Pay attention to the safety requirements and the dimen-

sions of the machine. The selected location must ensure a suitable connection to the electrical sup-

ply. Make sure that the machine is placed on a solid and level surface and that the ground can sup-

port the load of the machine. The machine must be levelled at all support points. It is also neces-

sary to guarantee a distance of at least 0.8 m around the machine. The necessary distance for the

feeding of long workpieces must be provided.

14.3 Assembly

The machine is delivered pre-assembled. The wheels supplied must be assembled as shown below.

Before commissioning, check all screw connections for tightness and tighten them if necessary.

Dangerous electrical voltage! The machine may only be connected to the mains sup-

ply and the associated checks carried out by a qualified electrician or under the instruc-

tion and supervision of a qualified electrician!

ZIPPER MASCHINEN GmbH

ZI-WP700TN

W A R N I N G

www.Zipper-Maschinen.at

Anchoring on level ground

Use four bolts to secure your machine to the

ground. Due to the different ground conditions,

these are not included in the delivery content. Se-

lect the correct bolt type for your soil conditions

(see Figure).

Slide one washer (1), wheel (2) and another washer

(3) onto the wheel axle and secure with a cotter pin

(4).

ASSEMBLY

Tabla de Contenido