Silverline 125563 Manual De Instrucciones página 9

GB
All manuals and user guides at all-guides.com
Troubleshooting
Problem Possible cause Solution
No power Check power supply
No function when On/Off Trigger
Switch (1) is operated
Have the On/Off Trigger Switch replaced by an authorised Silverline
Defective On/Off Trigger Switch
service centre
Slow material removal Sanding disc too fine or worn Fit new sanding disc with coarser grit
Sanding disc too coarse Fit new sanding disc with finer grit
Scratches on workpiece after
sanding
Not enough material removed Continue sanding
Sanding disc incompatible with material Fit correct sanding disc
Burn marks on workpiece
Too much pressure exerted on to the sander Use less pressure whilst moving the machine
Vacuum dust extraction system not connected, or Check connection of the vacuum hose, and ensure dust extraction
extraction system not switched on system is switched on
Excessive dust emission
Dust extraction not working; sanding disc not
aligned with dust extraction holes in the backing Realign sanding disc; unblock dust extraction holes
pad; extraction holes blocked
8