imilab C20 Pro Manual Del Usuario página 5

3. Make sure to position the base unit so that the arrow
is pointing up. Secure the base unit in place by tightening
the screws into the plastic anchors.
4. Align the groove at the bottom of the camera with the raised part on the base,
snap it in and rotate it in the direction shown below until locked in place.
Warning:
To avoid any damages or injuries, the device must be securely fastened to the
floor/wall as specified in the installation instructions.
When mounting the security camera on a wall:
Please note that the wall must be able to support at least triple the product's total
weight.
Upward perspective
EN-03