Dream On Me HYGGE Manual Del Usuario página 8

CRIB ASSEMBLY - FEET ASSEMBLY
1
1a. Place the parts on a soft surface before
assembly. Align the Left Feet (7) and the
Right Feet (8), respectively to the Center
Base Rail (6) as shown in the illustration.
1b. Place the Metal Pins (H) between the Left
Feet and Center Base Rail. Similarly,
place the Metal Pins between the Right
Feet and the Center Base Rail.
1c. Position the Half Moon Washer (G)
in the designated slots on the
Center Base Rail. Similarly,
attach the Bolts (D) in the
insertions provided on the
Center Base Rail, fixing
them to the Feet.
1d. Tighten the Bolts using the
Allen Key (J) provided.
Follow the above steps for
the second Center Base
Rail.
NOTE:
1. Do not overtighten the
bolts.
D
Bolt 1-3/4" (×4)
8
(7)
(8)
G
Half Moon Washer (x4)
(7)
(H)
(H)
(G)
(D)
(4)
(4)
H
4x30 mm Metal Pin (x8)
Φ
www.dreamonme.com/help
(4)
(8)
(7)