Complete The Installation - KALLISTA P24490-CR Instrucciones De Instalación

INSTALLATION INSTRUCTIONS
‰ Install the lavatory according to the lavatory manufacturer's instructions.
‰ Connect the supply hoses (not provided) to the supply stops (left is hot; right is cold).
‰ Tighten all connections with an adjustable wrench.
‰ Connect the P-trap (not supplied) to the tailpiece.
‰ Ensure that all connections are watertight.
‰ Remove the aerator by turning it counterclockwise. If needed, use the supplied key to remove the aerator.
‰ Open the drain. Turn on the water supply and check all connections for leaks. Repair as needed.
‰ Open both the hot and cold valves.
‰ Run water through the spout for 1 minute to remove any debris.
‰ Turn off the valves.
‰ Reinstall the aerator. Retain the key for future use.
1491057-2-A
6 of 20
5. COMPLETE THE CONNECTIONS

6. COMPLETE THE INSTALLATION

Lavatory Faucet
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.