Sekey Home 3001 Manual De Usuario página 10

C.Place the mounting bracket on the wall and mark the positions of the four screw holes.Make sure
that the bracket is level. Use an electric drill and #6 drill bit to drill four screw holes.
Two people lift the heater, and then carefully place it on the mounting bracket,ensuring that bracket
and heater are firmly engaged.
NOTE: It is strongly recommendedto screw the mounting bracket(C) into the wall studs if possible.If
the wall studs cannot be used, make sure that the bracket is secured to the wall with the provided
plastic anchors and the bracket is sufficiently secured.
E. Drill two screw holes with an electric drill and #6 drill bit, use two 3.5X8mm screws to fix the
metal bracket on the back of the fireplace and fix the other end to the wall with two Drywall anchors.
7