Publicidad
Idiomas disponibles
Idiomas disponibles
Touch Key-Press
BUTTON
ON: Enable the control panel function and remote
control.Turn on the flame effect.
OFF: Turn off the control panel function, remote
control andthe flame effect.
POWER
ON/OFF
COLOR button: Change the flame effect of 7
colors.
NOTE: This button
FLAME
you can also press the flame effect button on
COLOR
the control panel of the fireplace to set the
flame color.
TEMPERATURE ADJUSTMENT button:Temperature
increase adjustment.
TEMPERATUR
E
INCREASE
ADJUSTMENT
TEMPERATURE ADJUSTMENT button:Temperature
decrease adjustment.
TEMPRETURE
DECREASE
ADJUSTMENT
TIMER button: Control timer settings to turn off the
fireplace at the selected time.
The settings range from 30 minutes to 9 hours.
TIMER
Remote control Operation
ON/OFF
Press button ON/OFF on theremote control to turn onthe flame effect.
The default interface is as follows:
The heating icon will display and start heating when the room temperature
is less than the default setting (10°C), on the contrary it will not display
and heat.
The clock icon will be flashing when the time is not set. Please follow the
steps in "Time Setting" to set the time.
FUNCTION
is on remote controller,
10
ACTION&INSTRUCTION
1. Touch once to turn on power and the
indicator. All functions are enabled.
2. Touch again to turn it off.
1. Press once to change the flame color.
2. Keep pressing until it is set to the desired
color. There are 7 colors in total.
1. When the set temperature exceeds the
detection temperature, the machine begins to
heat up.
2. When the detection temperature reaches
the set temperature, the machine will stop
heating and the fan will stop working in 10
seconds.
1. When the set temperature is lower than
the detection temperature, the machine will
stop heating and the fan will stop working in
10 seconds.
1. Press once to turn on the indicatorand
start the time setting.
2. Keep pressing until it is set as needed.
The LED screen displays the setting.
Publicidad
