Installing The Machine - Ricoh A6500 Manual De Instrucciones

3. Installing the Machine

Installing the Machine
• When mounting the machine on a wall, be sure to contact your local dealer. Incorrect
mounting may cause the machine to fall or topple over, resulting in injury.
• When installing the controller, be sure to contact your local dealer. There are high voltage
components inside the machine, which can cause electric shock.
• When mounting the machine on a stand, use a commercially available stand that complies with
the VESA standard.
• At minimum, use a stand with a load capacity of 45 kg or more, and use a stand that matches
with the display size of the machine.
• RICOH Interactive Whiteboard A6500:
45 kg (99.2 lb.)
• RICOH Interactive Whiteboard A7500:
60 kg (132.3 lb.)
• RICOH Interactive Whiteboard A8600:
80 kg (176.4 lb.)
• If not properly mounted on a suitable stand, it could become unstable and could cause injury.
• This machine cannot stand on its own. Do not stand the machine upright or use it against a wall or
other surface.
The machine can be mounted in the following ways:
By mounting the machine on the stand
See page 26 "Stand Mounting Precautions".
By mounting the machine on a wall
See page 27 "Wall Mounting Precautions".
23