Connecting The Touch Module - Ricoh A6500 Manual De Instrucciones

Connecting the Touch Module

Connect the port on the machine that supported the touch module to the USB port of a computer, by
using the USB cable.
The touch module of the machine supports easy Plug-and-Play operation. There is no need to install
additional drivers on the computer.
The combinations of ports and cables of the machine that supports the touch module are as follows:
TYPE-C (USB Type-C)
When using TYPE-C, connect the machine to a computer via a USB type-C cable.
TOUCH-USB
When using TOUCH-USB, it is necessary to connect the video input terminal of the machine to the
video output terminal of the computer via a cable, separate from the USB cable.
Connect the supplied USB cable to the TOUCH-USB port on the front or back of the machine
according to the video input terminal that you want to use.
• When using HDMI on the front side of the machine
Connect the supplied USB cable to the TOUCH-USB on the front side of the machine.
• When using any of DP, HDMI1, HDMI2, or VGA on the back side of the machine
Connect the supplied USB cable to the TOUCH-USB on the back side of the machine.
TYPE-C
TOUCH-USB
HDMI
TOUCH-USB
DP
Connecting the Touch Module
Y313IX0027
USB
HDMI
Y313IX0028
USB
Display
Port
Y313IX0037
41