A2 Instructions For Periodic Maintenance - Acqua Brevetti KT100 Instrucciones De Instalacion Y Uso

A1.6 Performances and technical datasheet
Water inlet/outlet connections
Equipment inlet/outlet connections
Sampling taps connections
Flow rate (ΔP = 0,2 bar)
Flow rate (ΔP = 0,5 bar)
Min/max working pressure
Min/max water temperature
Min/max water temperature

A2 INSTRUCTIONS FOR PERIODIC MAINTENANCE

Warning! Before carrying out any intervention on the filter other than cleaning operation,
place the filter in by-pass position.
Warning! If maintenance requires disassembly of the equipment, parts which come in
contact with drinking water must be handled with care from hygienic point to avoid
contamination of the hydraulic system. Use suitable disposable gloves. Any tools used must
be cleaned and disinfected before use
A2.1 Periodic checks
It is advisable to make a biannual check by an authorized technician to verify the proper operation
of the equipment.
A2.2 Extraordinary maintenance
The extraordinary maintenance or repair interventions, if not correctly performed, can compromise
the functional and/or safety features: these operations are deliberately omitted in this manual. All
maintenance and extraordinary repair interventions not mentioned in this manual have to be carried
out exclusively by an authorized Acqua Brevetti SRL TSC. Acqua Brevetti SRL has established and
organized an efficient technical assistance service covering the entire national territory with
specialized technicians who will be at your disposal to ensure the perfect functioning of our
equipment. Please visit the website www.acquabrevetti.it for the list of authorized TSC closer to you.
A2.3 Troubleshooting
Problem
Water hardness is not correct.
Water is not treated.
MAN 145
KIT FACILE - ENGLISH
-
-
-
m
m
bar
°C
°C
Cause
Incorrect position
hardness mixing valve .
Incorrect position of the by-
pass selector.
Units
1" M for ¾" pipe union
¾" GAS F
½" GAS F
/h 1.2
3
/h 2.0
3
1.5 - 10
5 – 30
5 – 40
Solution
of the Turn the hardness mixing
valve checking
hardness at the water outlet.
Change the position of the by-
pass selector.
KT100
for water
PAG.E-7