MZ electronic EV-011 Instrucciones De Uso página 19

•
The seal must be positioned between the cain counter and the dashboard.
•
For instructions on making electrical connections, see the attached diagram. The
wires must have a minimum cross section size of 1.5 mm². Do not use the voltage
generated by the engine battery set to provide power.
•
Install a 0.5 A (ampere) safety fuse on the + wire of the battery.
•
The instrument complies with EMC standards (EN55022) and must be positioned at a
distance of 0.5 metres (1.64 Ft) from radio receiver devices.
EV-011
19
English
Rev. 07 – 2010