Environmental Protection; Technical Data - Metabo WPB 36 LTX BL 230 Manual Original

the LEDs indicate the charge level. When the
battery pack is empty it must be recharged.
Electronic safety stop: The electronic signal
display (4) flashes and the machine was
SWITCHED OFF automatically. If the slew rate of
the current is too high (for example, if the machine
suddenly seizes or kickback occurs), the machine
switches off. Switch off the machine. Switch it on
again and continue to work as normal. Try to
prevent the machine from seizing. See chapter 4.2.
12. Accessories
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
Fit accessories securely. If the machine is operated
in a holder: secure the machine well. Loss of control
can cause personal injury.
Always use the suitable accessory and the
prescribed guard for the matching guard for
the application. See page 5. (Illustrations are
examples).
Application:
1 = surface grinding
2 = cut-off grinding
3 = drilling of holes
4 = wire brushes
5 = grinding with sanding paper
Accessories:
1.1 = grinding wheel
1.2 = cup wheel (ceramic)
2.1 = cut-off wheel "metal"
2.2 = cut-off wheel "masonry/concrete"
2.3 = diamond cutting disc "masonry/concrete"
2.4 = dual-purpose diamond cutting discs
(combined grinding and cutting disc)
3.1 = diamond drill bits
4.1 = wheel brush
4.2 = cup brush
5.1 = flap disc
5.2 = backing pad for sanding sheets
prescribed guard:
Type A = cutting guard
Type B = guard for grinding
Type C = guard for grinding and cutting-off
operations (combination)
Type D = guard for cup wheel
Other accessories:
(see also www.metabo.com)
A Chargers
Best.-Nr.: 627378000 ASC 145
Best.-Nr.: 627265000 ASC Ultra
Best.-Nr.: 627495000 ASC 145 Duo
etc.
B Battery pack
18 V
Best.-Nr.: 625368000 5,5 Ah LiHD
Best.-Nr.: 625369000 8,0 Ah LiHD
Best.-Nr.: 625549000 10,0 Ah LiHD
DS
Best.-Nr.: 624990000 5,5 Ah LiHD
Best.-Nr.: 624991000 10,0 Ah LiHD
36 V
Best.-Nr.: 625344000 6,2 Ah LiHD
etc.
C Adjusting nut (9)
D Quick"clamping nut
For a complete range of accessories, see
www.metabo.com or the catalogue.
13. Repairs
Repairs to power tools must only be carried
out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.

14. Environmental Protection

The sanding dust generated may contain
hazardous materials: do not dispose of with the
household waste, but at a special collection point
for hazardous waste.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs must not be disposed of with regular
waste! Please return faulty or used battery packs to
your Metabo dealer!
Do not throw battery packs into water.
Only for EU countries: never dispose of
power tools in your household waste! Used
power tools must be collected separately and
handed in for environmentally compatible recycling
in accordance with European Directive 2012/19/EU
on waste electrical and electronic equipment and its
implementation in national legal systems.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).

15. Technical Data

Explanatory notes on the specifications on page 4.
Changes due to technological progress reserved.
U = Battery pack voltage
D = max. diameter of accessory
max
t = max. permitted thickness of clamping
max,1
shank on accessory when using clamping
nut (9)
t = grinding wheel/cut-off wheel:
max,2
max. permitted thickness of accessory
t = max. permitted thickness of clamping
max,3
shank on accessory when using "Quick"
clamping nut (10)
t = max. permitted thickness of wheel-type
max,4
wire brushes
M = Spindle thread
l = Length of the sanding spindle
n = No-load speed (maximum speed)
0
ENGLISH en
21