Safety Warnings; Important Safety Instructions - Makita XRU16 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge, battery adapter and charger
Battery cartridge
Battery adapter
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.

SAFETY WARNINGS

Important safety instructions

WARNING:
When using electric gardening
appliances, basic safety precautions should
always be followed to reduce the risk of fire,
electric shock, and personal injury, including the
following.
Read All Instructions
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
2-tooth blade
(P/N 198345-9)
3-tooth blade
(P/N 195299-1)
4-tooth blade
(P/N 195150-5)
(P/N 196895-8)
Nylon cutting head
(P/N 198893-8)
XRU16
Bike handle
1,846 mm (72-1/2")
2.0 - 2.3 mm (0.08" - 0.09")
5.9 - 6.5 kg (13.0 - 14.3 lbs)
BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
SAVE THESE INSTRUCTIONS.
General instructions
1. Never allow people unfamiliar with these
instructions or children to use the machine.
Local regulations can restrict the age of the
operator. It is dangerous in the hands of untrained
users or children.
Be sure that anyone who is to operate the tool
2.
has first read the instruction manual.
Use the tool with the utmost care and
3.
attention.
4. Operate the tool only if you are in good phys-
ical condition. Perform all work calmly and
carefully. Use common sense and keep in mind
that the operator or user is responsible for
accidents or hazards occurring to other people
or their property.
2 ENGLISH
XRU17
Loop handle
3: 0-7,000 /min
2: 0-5,500 /min
1: 0-4,600 /min
255 mm (10")
255 mm (10")
230 mm (9")
255 mm (10")
430 mm (17")
D.C. 36 V
5.7 - 6.3 kg (12.6 - 13.9 lbs)
BAP182 / PDC01