General Safety Instructions - LaserLiner StarSensor 50 Manual De Instrucciones

Completely read through the operating instructions,
the „Warranty and Additional Information" booklet as
!
well as the latest information under the internet link at
the end of these instructions. Follow the instructions
they contain. This document must be kept in a safe
place and if the laser device is passed on, this docu-
ment must be passed on with it.
Function / Application
This electronic locating device finds wall beams and joists as
well as live wires. The device analyses the surface at five points
simultaneously and signals the detection of concealed objects
via the LED display.

General safety instructions

– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures, moisture or significant vibration.
– Do not work alone in the vicinity of hazardous electrical
installations and only under the guidance of a qualified
electrician.
Additional information on use
Observe the technical safety regulations for working on electrical
systems, especially: 1. Safely isolating from power supply,
2. Securing to prevent system being switched on again,
3. Checking zero potential, two-pole, 4. Earthing and short-
circuiting, 5. Securing and covering adjacent live components.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limit values in accordance with
EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. Electronic devices can potentially
cause hazards or interference or be subject to hazards or
interference.
StarSensor 50
07
EN