Publicidad
Idiomas disponibles
Idiomas disponibles
cords immediately. Damaged cords
increase the risk of electric shock.
• Before connecting the tool to a
power source, be sure voltage
supplied is the same as that
specified on the nameplate of the
tool. A power source with voltage
greater than that specified for tool
can result in serious injury to the
user as well as damage to the tool.
Specific Operation Guide
• Ensure thate the directional arrow
marked on the blade corresponds
with the rotational direction of the
motor.
• Always keep the blade-securing
arbour and collars clean.
• Always keep the blade-securing
means is securely tightened with the
wrench provided.
• Ensure the workpiece that will be
cut off has sufficient room to move
sideways. Failure to do so may
result in the off binding against the
blade.
• Let the blade reasch full speed
before commencing the cut.
• Let the blade come to a complete
stop before removing any jammed
or off cut material from around the
blade area.
SAW FEATURES
1.
Laser light Module
2.
Laser light switch
3.
Opening of laser light
4.
Trigger switch
5.
Lock-off button
6.
Motor housing
7.
Main handle
8.
Front handle
9.
Bevel adjustment knob
10.
Bevel scable
11.
Parallel fence locking knob
12.
Parallel fence
13.
Blade guard lever
14.
Lower blade guard
15.
Base plate
16.
Upper blade guard
17.
Dust extraction port
18.
Depth locking lever
19.
Depth of cut indicator
20.
Spindle lock button
21.
Blade
22.
Blade wrench
23.
Blade guide notch
7
Publicidad
