Publicidad
Idiomas disponibles
Idiomas disponibles
Sharpen blade is designed for
cutting wood and plastic, not for
metal! All other applications are
expressly excluded.
UNPACKING
Due to modern mass production
techniques, it is unlikely that your
power tool is faulty or that a part
is missing. If you find anything
wrong, do not operate the tool
until the parts have been replaced
or the fault has been rectified.
Failure to do so could result in
serious personal injury.
ACCESSORIES
Parallel
7/8" bore
guide
adapters
The contents of the container are as
follows:
Parallel guide – 1pc
Socket wrench – 1pc
Instructions manual – 1set
Bore adapters – 1set
ASSEMBLY
The saw is packed, fully assembled
except for the rip fences.
BLADE INSTALLATION
For your own safety and protection,
do not attempt to operate this saw
until
is
completely
and installed according to this
instruction. Read and understand
the capability of the multi-function
saw and the hazards associated
with its operation.
Sandwich the blade between two
flanges.
The procedure is as follows:
Step 1:
Unscrew the spindle bolt using
socket
anticlockwise direction (see fig 1)
and press the spindle lock button
(see fig 3) meanwhile:
• Remove the bolt and outer flange.
• Inner flange (A) remained on
Socker
spindle (shown in fig 2)
wrench
FIG 1
• Raise the lower blade guard using
the blade guard lever.
Step 2:
• Fit the blade supplied onto inner
flange.
• Make sure that the rotation direction
of blade shall be in the same as the
narrow on the blade guard (fig 1 ).
assembled
wrench
supplied
FIG 2
in
8
Publicidad
