Publicidad
Idiomas disponibles
Idiomas disponibles
Note: Never fill the bowl beyond the MAX level mark or exceed the maximum amount
indicated in the table (see into section 'Cooking Guide'), as this could affect the quality
of the end result.
4. Slide the bowl back into the appliance.
Caution: Do not touch the bowl during use and for some time after use, as it gets very
hot. Only hold the bowl by the handle.
5. To begin cooking, you can select between the automatic cooking mode and the manual settings.
a. If choosing manual settings:
• Adjust the temperature
with the
and
varies from 40-220°C (105-428°F).
• Then set the desired cooking time by pressing
between 0 and 60 minutes.
• Press the
to begin cooking with the selected temperature and time settings. Cooking
starts. The selected temperature and remaining cooking time will alternate on the screen
display.
b. If choosing automatic cooking mode:
• Press directly the menu selected on the screen (these modes are described in detail in the
"Cooking guide" section).
• Confirm the cooking mode by pressing the Start button
• Cooking starts. The selected temperature and remaining cooking time will alternate on the
on-screen display.
6. Excess oil from the food is collected in the bottom of the bowl.
7. Some foods require shaking halfway through the cooking time (see section 'Cooking Guide').
To shake the food, pull the bowl out of the appliance by the handle and shake it. Then slide the
bowl back into the appliance and press the Start button
8. When you hear the timer sound, the cooking time set has finished. Pull the bowl out of the
appliance and place it on a heat-resistant surface.
9. Check if the food is ready.
If the food is not ready yet, simply slide the bowl back into the appliance and set the timer
for a few extra minutes.
10. When the food is cooked, take out the bowl. To remove food, use a pair of tongs to lift the
food out of the bowl.
Caution: When you turn the bowl, be careful of any excess oil collected at the bottom of the
bowl that may leak onto the food and of the grid may fall down.
After hot air frying, the bowl, the grid and the food are very hot. Depending on the type of
food cooked in the appliance, be careful as steam may escape from the bowl.
11. When a batch of food is ready, the appliance is instantly ready for preparing another batch
of food.
SYNCHRONISATION MODE (DUAL COOKING)
Cook 2 different foods ready at the same time thanks to SYNC Mode.
1. Place the grill into the bowl and then the divider in the middle.
2. Press
and then press the button
3. Select your food P1. All programs are open for selection.
4. Select your food P2. All programs are open for selection except P1 just selected.
5. The pictogram of the food to be added first flashes and the screen displays ' A dd'.
Note : The 2 ingredients are not added at the same time, they have different times of
cooking (the cooking temperature is automatically set at 180°C / 356°F). The appliance
calculates automatically the food to be added first.
buttons on the digital screen. The temperature
and
buttons. The timer can be set for
. This will launch the cooking process.
again to restart cooking.
.
6
6. Place your first food in the left part in the bowl. Slide the bowl back into the appliance.
7. Press
to begin cooking.
8. The appliance beeps when you need to add the 2
Note : the appliance calculates automatically to ensure 2 foods ready at the same time.
9. Add your second food in the right part of the bowl.
10. The appliance beeps when the food is ready, at the same time.
Note : Some ingredients require the same cooking time. In this case, add the 2 ingredients
at the same time.
11. When the food is cooked, take out the bowl. To remove food, use a pair of tongs to lift the
food out the bowl.
USING THE GRILL PLATE
1. Place the grill grid in the bowl of the appliance. Be careful to place it correctly with the
TOP marking on the top (the raised part).
2. Press
, then press
on the screen to select the Grill mode.
3. Start the Grill mode by pressing
. This will launch the preheating phase (timing :15 minutes , the
grilling temperature is automatically set at 220°C/428°F).
4. When you hear the timer sound, the preheating phase has finished. The screen displays ' A dd'.
5. Take the bowl out the appliance and place it on a heat-resistant surface.
Caution : the bowl and the grill grid are very hot. Use a pair of tongs to place the food
on the grill plate.
6. Place the food on the grill plate and put back the bowl into the appliance.
7. Select the required cooking time by pressing
8. Press the Start button to launch the cooking. The temperature and remaining cooking
time will alternate on the on-screen display.
Note : the pieces of meat can be turned at half cooking.
Excess oil from the food is collected in the bottom of the bowl.
9. When you hear the timer sound, the cooking has finished. Take the bowl out the appliance
and place it on a heat-resistant surface.
10. When the food is cooked, take out the bowl. To remove food, use a pair of tongs to lift the
food out the bowl.
Caution: After hot frying, the grid and the food are very hot.
DEHYDRATION
1. Place the grid in the bowl of the appliance.
2. Press
, select Air Fry and then adjust the temperature
on the digital screen.
3. Then set the desired cooking time by pressing the
from 1 hour to 10 hours.
4. Press the
to launch the dehydration process. The selected temperature and remaining
cooking time will alternate on the screen display.
5. When you hear the timer sound, the dehydration process has finished. Take the bowl out the
appliance and place it on a heat-resistant surface.
6. Check if the food is ready. If the food is not ready yet, put it back on the appliance and set
the timer for a few extra minutes.
7. When the food is dehydrated, take out the bowl. To remove food, use a pair of tongs to lift
the food out the bowl.
food.
nd
and
buttons (see section 'Cooking guide').
by pressing
button to 40°C (105°F)
and
button. You can set the timing
7
EN
Publicidad
