Hdmi Mode - LG 32PC5RVH Manual De Servicio

13. HDMI mode

Is only video
normal?
No
Is only audio
normal?
Check the TMDS line wave.
(R312~E3273)
Is the wave
continuous?
Yes
1. Check the HDMI receiver's status register. (0x60, offset 0x66)
- If the value is 0xf or 0x8, it is normal.
2. Check the HDCP register. (0x6, offset 0x32)
- Enable bit 6 : HDCP key loaded
- Enable bit 5 : HDCP decryption active
- Enable bit 4 : HDCP authentication attempted
Reset TMDS power down/ on register.
- 0x60, offset 0x3f => 0xff
Copyright©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Yes
Download EDID data each port.
1. Check TV input mode.
(HDMI 1 port support HDMI and DVI.
So if you input DVI signal and PC audio from phone
jack, You can hear PC audio.)
Yes
2. Unplug and plug in the HDMI cable.
(sometimes an ESD surge occurred at HDMI port.)
3. Check the HDMI Mute register. (0x68, offset 0x37)
4. Check the Audio-out channel mute register (0x68,
offset 0x32) is appropriately enabled.
No
Check the HDMI source.
Change to another source or cable.
Yes
- 19 -
No
Normal video,
Normal audio?
Replace the IC303.
LGE Internal Use Only
Free Datasheet http://www.datasheet4u.com/