Sanremo YOU Manual De Instrucciones página 85

Malfunction: causes and solutions
PROBLEMS
Coffee is too cold
The machine does not dispense
hot water
Coffee is not dispensed or is
dispensed too slowly
Coffee is not dispensed
The machine does not dispense
steam
Coffee overflows from the edges
of the filter holder
CAUSES
Machine not ready
Presence of limescale in the boiler
Machine not ready
Faulty dispensing solenoid valve
Clogged dispensing ducts
Insufficient water supply
Clogged filter holder dispensing
hole
Grinding too fine, possible
generation of error "A7" on the
group display
Group solenoid valve malfunction
Group gigleur clogging (probable
limestone)
Clogged dispensing nozzle
Clogged dispensing ducts
Faulty steam tap
Dirty residues are present in the seat
of the filter holder, preventing coffee
from flowing through the spout
Group gasket worn out
Clogged heads
85
SOLUTIONS
Wait for the temperature to be
reached
Call the technical service
Wait for the temperature to be
reached
Call the technical service
Call the technician to perform a
limescale removing cleaning
Check the supply line
Clean the filter holder thoroughly with
specific detergent or using a toothpick
Adjust the grinder dosing device
Call the technical service
Call the technical service
Clean
Call the technician to perform a
limescale removing cleaning
Call the technical service
Clean
Replace
Clean or replace
YOU