Indicator Light; Navigating The Menus - essentiel b 24 PIXEL VIEW Instrucciones De Uso

Indicator light

18
Indicator light:
- blinks red when the screen is on standby
- blue when the screen is in operation

navigating the menus

Pivot the control button downwards after turning on the monitor:
1.
Move the control button upwards or downwards to navigate the various menus.
2.
Move the control button to the right to confirm the selected menu or sub-menu.
3.
Move the control button upwards or downwards to select a setting or change a value.
4.
Move the control button to the right to confirm.
5.
All changes are automatically saved.
Menus Sub-menu Description
Display
• •
Contrast •
•
Pre-settings •
•
DCR •
•
Display
Overdrive
• •
HDR
•
•
Horizontal or
• •
vertical position
Clock
• •
Map
• •
System Image
Ratio
• •
Adjust display brightness.
Adjust display contrast.
Set to Eco mode. Automatic contrast and
brightness adjustment are enabled only when
standard mode is selected.
Detect the distribution of input signals and create
an optimized contrast. Pivot the control button to
the right to activate or deactivate the DCR function.
Adjust overdrive intensity depending on the use of
the monitor.
Automatically apply an optimal HDR effect
depending on the video source.
Manually adjust the vertical (V) and horizontal (H)
position of the image.
Adjust the horizontal scanning frequency.
Adjusting the phase of the image to reduce noise.
Adjust the image ratio.
19