Rack Installation - fortress TeleCom 750 VA Guia Del Usuario

Rack Installation

To mount the Fortress.TeleCom in a 19-inch (483-mm) EIA 310 C standard rack, follow these
instructions.
Do not try to mount the unit if the rack is too wide. This procedure requires two people.
1. Install a stationary shelf or supporting angle brackets (available as standard rack hardware
from electronics distributors) below the intended rack location for the Fortress.TeleCom.
Secure the shelf or brackets at both the front and back of the rack using bolts, nuts, and
washers.
2. With the help of another person, carefully lift the unit onto the shelf or brackets and slide it
into the rack as shown below. The mounting holes on the sides of the front panel should
match the holes in the rack.
3. Use bolts and washers to attach the unit securely to the rack.
ENGLISH 8