Publicidad
Idiomas disponibles
Idiomas disponibles
USER GUIDE
ASHDOWN ENGINEERING - AGM
INPUTS
The AGM range features 1/4" jack sockets which are be used to connect the output from your
guitar to the amplifier Always use a high quality guitar lead to ensure a reliable connection, the
integrity of your signal, and the minimising of noise.
On some models there are two inputs , where fitted these have different tunings to
give either a bright classic brit crunch as the base tone or a heavy thick American tone Single
inputs are voiced to accommodate all tones .
AUX INPUT
Where fitted the Aux input is accessed through either a 3.5mm Mini jack or ¼" socket and is
designed to be driven by the output from a signal source such as an MP3 or Phone the level can
be mixed with the guitar signal from the
Pre amp and the overall volume controlled with the Master control.
BOOST
Where fitted The Boost control is used add an extra gain boost and is controlled by the "Boost"
control on the front panel. The function is placed ahead of the preamplifier so works in a similar
way to a boost pedal.
GAIN CONTROLS
The Gain control or controls are used to vary the amount of signal passing through the pre amp.
With the control set low you will be able to get clean tones (used in conjunction with the Master
as described later). Increasing the gain allows more signal to pass through the preamp, causing
the amplifier to overdrive and distort.
MUTE CONTROL
Where fitted the mute switch simply mutes the output of the amplifier so instrument changing can
be accomplished
in silence.
Publicidad
