04 Temp.
05 Time
06 Wrinkle Prevent
07 Damp Alert
08 My Cycle
09 Adjust Time
10 Power
11 Start/Pause
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.
DV6900B_LED_WEB_Vent_EN.indd 39
Press to change the temperature of the current cycle.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
• Low: For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
• Extra Low: Provides the lowest heated drying temperature
possible.
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent cycle.
The Damp Alert notifies you when the average dry level in a load
is damp dry (80% dried). This lets you take items that you don't
want fully dried or that dry quickly out of the dryer early while
letting others continue to dry.
You can select this option in all Sensor Dry cycles except for
SANITIZE, WOOL, and ACTIVEWEAR. Available dry levels are
Normal Dry, More Dry, and Very Dry.
Choose your favorite cycle including the cycle time, temperature,
and dryness. See "My Cycle
You can change the set time in the Manual Dry cycles. To change
the cycle time, press Adjust Time until the desired time is
displayed.
Press to turn on/turn off the dryer.
Press to start or stop operation.
" for details.
English 39
2022/5/16 12:25:40