RUBY HEAT RP-2000 PLUS Manual De Instrucciones página 15

Introduction
The RP-2000 PLUS Infrared heaters produce instant and comfortable heat like the sun.
These robust and weatherproof heaters are designed for domestic and commercial
heating applications within indoor and outdoor areas.
Model
Voltage(V)
Wattage(W)
Amps(A)
Btu(HR)
Dimensions W×H×D(mm)
Weight(KG)
INSTALLATION
Tools Needed:
* Pencil *Hammer
Important: Ensure that the supply cables is well mounted and that it does not come into
contact with reflector of the heater or that does not trail into heated area.
1.This heater should be installed by a competent person, i.e. a qualified electrician.
2.Always disconnected the heater from the electricity supply and allow it to cool before
installation.
3.This heater can be heat directly.
4.Keep the supply cord away from the body of the heater which will get hot during use.
5.Do not place the heater on an inflammable surface.
6.Place on a flat, stable surface when used
7.Observe the minimum safe distance between the heater body and the inflammable
surfaces when used.
8.If the heater is to be used outside, a weatherproof outlet is recommended.
9.Fasten the brackets securely to the heater using the nuts and screws supplied.
*Level *Screw Driver
RP-2000 PLUS
230
2000
12.2
5115
500*500*2075
10.7
*Power Drill and drill bits
15