Assembly - Senix LSPG-M7 Manual Del Operador

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Make sure
to service engine with gasoline and oil as instructed in the Engine
Manual before starting or running the machine.
NOTE: Reference to right and left hand side of the Lawn Mower is observed from
the operating position.
OPENING CARTON
1. Cut each corner of the carton vertically from top to bottom.
2. Remove all loose parts.
3. Remove loose packing material.
REMOVING UNIT FROM CARTON
1. Lift unit from the rear to detach it from underlying carton material and roll unit
out of carton.
2. Check carton thoroughly for any other loose parts.
Assembly parts in carton
• Handle Fixing Knob (Qty. 2)
• Grass Catcher
• Side Discharge Cover
• Bottle of oil
• User Manual/Engine Manual

ASSEMBLY

Attach Handle
IMPORTANT: Do not crimp the cables when assembling the handle.
1. Pull the folded handle assembly up to the working position at first (Figure 2).
2. Screw two handle fixing knobs for mounting the lower handle on the mower
handle holder (Figure 3).
3. Reinforce the connection between upper handle with lower handle by tighten
two handle connecting knobs (Figure 4).
8
ASSEMBLY
Figure 2
Figure 3
Figure 4
WWW.SENIXTOOLS.COM