Publicidad
Idiomas disponibles
Idiomas disponibles
The heater has a built-in overheating protection mechanism. The safety mechanism will
●
turn off the power if the heater overheats. Turn the ON/OFF switch (5) off and pull the
plug from the wall socket. Wait 10 - 15 minutes for the heater to cool down. Remove the
cause of overheating, such as excessive dust, and turn on the heater. If for any reason
the heater does not turn on, take it to your local service center for repair.
CLEANING AND CARE
CAUTION:
Always unplug the appliance from the mains power supply and let it cool
down before cleaning.
We recommend that you clean the heater regularly.
●
Wipe the outside of the appliance with a soft, damp cloth and dry thoroughly. Do not let
●
any liquid enter the heater.
Periodically check the power cord and plug for signs of damage or overheating and if
●
necessary take to an authorized agent for repair.
NOTE:
Do not use solvents, chemical or abrasive cleaning agents, wire brushes, sharp objects
●
or scouring pads to clean the product.
Never immerse the appliance in water.
●
Always clean the appliance before storing it for a long time.
●
If you are not using the appliance for a long period, store the appliance in its original
●
packaging or in a dust-free, dry environment.
TROUBLESHOOTING
Problem
The appliance will
not turn on.
Correct Disposal of this product
According to the European waste regulation 2012/19/EU this symbol
on the product or on its packaging indicates that this product may not
be treated as household waste.
Instead, it should be taken to the appropriate collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this
product, please contact your local council or your household waste
disposal service.
Possible cause
The plug is loose
●
or not connected.
Check the fuse for
●
the main electricity
supply has not
blown.
Check the power cord and make sure it
●
is firmly connected to the wall socket.
Replace the fuse. If it is still not
●
working, try plugging into another wall
socket. If the problem persists, take
the appliance to a service center.
22
Solution
Publicidad
