Publicidad
Idiomas disponibles
Idiomas disponibles
carry out any modifications of
the product. Information about
maintenance and repair is provided
in this instruction manual.
12.Know how to stop the product
EN
quickly in an emergency.
13.Do not expose the product to rain.
Do not operate the product on a
wet hedge.
14.Use the product only in daylight or
good artificial light.
15.Prolonged use of the product
exposes the user to vibrations that
can cause a range of conditions
collectively known as hand-arm
vibration syndrome (HAVS) e.g.
fingers going white; as well as
specific diseases such as carpal
tunnel syndrome.
To reduce this risk when using the
product, always wear protective
gloves and keep your hands warm.
The symptoms of HAVS include
any combination of the following:
Tingling and numbness in the
fingers; Not being able to feel
things properly; Loss of strength
in the hands; Fingers going white
(blanching) and becoming red and
painful on recovery (particularly
in the cold and wet, and probably
only in the tips at first). Seek
medical advice immediately if such
SAFETY INSTRUCTIONS
50
symptoms are experienced.
16.Check the hedge for foreign objects
before operation, e.g. wire fences.
Take care that the cutting device
does not come into contact with
wire or other metal objects.
17.Hold the hedge trimmer properly,
e.g. with both hands if two handles
are provided. Loss of control can
cause personal injury.
18.The product should be supplied
via a residual current device (RCD)
with a tripping current of not more
than 30 mA.
Maintenance and storage
If the supply cable is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
If the carbon brushes need to be
replaced, have this done by a qualified
repair person (always replace the two
brushes at the same time).
1. Disconnect the product from the
power supply (i.e. remove the plug
from the power supply ) and check
for damage after use.
2. Disconnect the product from the
power supply (i.e. remove the
plug from the power supply )
before carrying out maintenance
or cleaning work.
Publicidad
