brennenstuhl DINORA Serie Manual De Instrucciones página 5

DINORA
4. Do not use the work lamp in explosive environments in which flammable liquids, gases or
dusts are present. Risk to life!
5. LED lights are extremely bright. Do not look directly at the lamp.
6. Damaged protective covers must be replaced with an original Brennenstuhl® protective cover
before the light can be used again.
7. If the mains supply cable of the device is damaged it must be replaced by a qualified technician
in order to avoid risks.
8. Make sure the light is attached firmly and securely.
Make sure the cable is not crimped or otherwise damaged.
9. Keep children away from the lamp. Children cannot estimate the risk of electric shock.
MAINTENANCE:
PLEASE NOTE: The LED light does not contain parts that need servicing.
The LED light source in this lamp may only be replaced by the manufacturer or a service
technician commissioned by the manufacturer or a comparably qualified person.
Never open the lamp when the mains supply cable is connected.
CAUTION: Risk of life due to electric shock!
For further information please see our Service/FAQ section at www.brennenstuhl.com.
CLEANING:
Do not use solvents, corrosive cleaners or the like.
Use a dry or slightly moist cloth for cleaning only.
DISPOSAL:
Dispose of electrical devices in an environmentally responsible manner!
Do not dispose of electrical devices with household rubbish!
In accordance with European Directive 2012/19/EU regarding electrical and electronic
devices must be collected separately and sent in for recycling.
Please contact your local authorities for available disposal options for your worn-out device.
Conformity declaration
The Declaration of Conformity is filed with the manufacturer.
Operating Instructions
D
5