Publicidad
GetActive™ Timer Button
1. Touching the timer button will cause the digital readout to blink. Use the Up button
timer settings: 00, 10, 15, 30, 45, 60, 75, 90, 105, 120. Use the Down button
120, 105, 90, 75, 60, 45, 30, 15, 10, 00. Touch the timer button again to confirm and start the countdown.
2. When the timer button is touched, the digital readout will display the remaining time. For example, 120, 119,
118, 117......05, 04, 03, 02, 01, 00). If the desk's height is adjusted during the countdown, the readout will show
the height and return to the timer afterwards.
3. When the countdown is finished, the desk will beep 5 times continuously in 3 successions and remain
stationary.
ODP85 REV.1
to cycle through the timer settings:
14
to cycle through the
Publicidad
