●
Seat incline: min -8°, max 34°
Leg incline in rela on to seat: min 50°, max 130°
●
Footrest Height, Incline and Distance in rela on to the axle: adjustable
●
Foot strap: standard
●
Polyurethane cushion 75 sh., H 50 mm (prof. Std. 400 mm) not an -sores.
●
●
Thigh strap H 80 mm (size M 560+1100 mm, size L 680+1200 mm)
Shin strap: H 50 mm
●
Frame protec on: Padding on front and on rear bar
●
Volume:
●
Total width: min 790 mm, max 940 mm (24"); min 870 mm, max 955 mm (26-28") [700
o
mm]**
Total length: min 840 mm, max 850 mm (24"); min 840 mm max 890 mm (26-28") [1200
o
mm]**
Total height: min 570 mm, max 960 mm (24"); min 570 mm, max 970 mm (26-28") [1200
o
mm]**
PIVOT width min 1580 mm, max 1680 mm (24"); min 1730 mm, max 1920 mm (26-28")
o
[1300 mm] **
Turning circle min 790 mm, max 840 mm (24"); min 870 mm, max 955 mm (26-28") [1000
o
mm] **
** Note: Some volume measurements may be greater than the measurements set out in the
EN ISO 12183 regula on [xxx mm]. In some cases, it may be difficult or impossible to use
emergency exits provided.
Weight: min 15 kg, max 15.9 kg
●
Maximum load: 120 kg
●
2.
Warning
The user is reminded that they should carry out a self-assessment of the cri cal points associated with their
specific pathology, and with their par cular postural requirements, before proceeding with any adjustments or
use of the wheelchair. OFFCARR does not accept any responsibility for any damages caused by incorrect
sea ng in the wheelchair, or by features of si ng in the wheelchair which are incompa ble with the user's
pathology.
The cushion provided IS NOT ANTI-SORE , it is made with expanded polyurethane with a density of 75
shore with a Nylon fabric cover.
Avoid contact of the wheelchair with water. Undesirable rust may occur on some metal parts and/or loss
of the safety features of the materials concerned.
The wheelchair must only be used for the sport it has been designed for, or for compa ble disciplines,
and not for transpor ng objects in general, and it must not be used in other contexts. This could be dangerous
insofar as some of the usual safety elements for the wheelchair in mo on are absent (e.g. Parking brakes, etc.).
Il convient de signaler les allergies causées par le contact avec des par es du fauteuil roulant.
Keep the wheelchair away from heat sources in order to avoid any of the components se ng alight. The
coverings meet the criteria for the standard ISO 7176 16:2012.
Do not put your fingers into the spikes when the wheelchair is in mo on.
Inflate the tyres to a pressure within the range indicated inside the tyre. If transpor ng by plane, it is
suggested that you deflate the tyres to avoid excess pressure.
Always check that the quick wheel removal devices are working properly, especially if you tend to take
them off and put them back on frequently.
5