Improper Use; Basic Safety Instructions - Orbitalum 790 048 765 Traducción Del Manual De Instrucciones Original

enGLISH
Information and safety instructions for the responsible body
2. InfORMATIOn And SAfeTy InSTRUCTIOnS fOR
THe ReSpOnSIBLe BOdy
2.1 Requirements for the responsible body
Requirements for the responsible body: The responsible body is responsible for safety in the danger zone around the
Tripod, and should allow only qualified personnel to enter the zone or operate the Tripod in the danger zone.
employee safety: The safety regulations described in chap. 2 must be observed and work must be carried out with safety in
mind using the prescribed protective equipment.
2.2 Using the Tripod
2.2.1 proper use
• The Tripod may only be used in combination with the Orbitalum tube saws GFX 3.0, PS 4.5 and PS 6.6.
Proper use also includes the following:
• observing all safety instructions and warning messages included in these operating instructions,
• observing all safety instructions and warning messages included in the operating instructions of
the tube saw used on the Tripod,
• sole use in the original condition with original accessories, spare parts and materials
2.2.2

Improper use

• A use other than that defined under "proper use" or a use that goes beyond this or the specified
constraints shall be considered improper use due to the potential risks involved.
• The responsible body shall be solely responsible for damages that arise through improper use and
the manufacturer shall assume no liability whatsoever.
• The removal of safety equipment is not permitted.
• Do not misuse the Tripod.
• The Tripod is not intended for use by private consumers.
2.3

Basic safety instructions

This Tripod is a state-of-the-art accessory designed for safe use. The risks involved in using this accessory are described in the
operating instructions below. Using this accessory in a way other than that described in these instructions can lead to serious
physical injury and material damage.
Therefore:
• Observe warning messages at all times.
• Observe the safety instructions and warning messages of the tube saw used on the Tripod.
• Store complete documentation near the Tripod together with the documentation of the tube saw used on the Tripod.
• Generally valid regulations for the prevention of accidents must be observed.
• Observe country-specific regulations, standards and guidelines.
• Use only original tools, spare parts, materials and accessories from Orbitalum Tools.
10
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
AppARATeSTändeR/TRIpOd
[REV. 20190506] OC_Tripod_BA_790048765_00__INH-02_EN