Publicidad
Idiomas disponibles
Idiomas disponibles
Pneumatic Cylinder and Seat Installation
(Fig. C, D)
1. Insert broad end of pneumatic cylinder
hole on the top side of the tool organizer tray
press into place by hand. Place the seat
unpainted end of the pneumatic cylinder.
2. Lock the pneumatic cylinder in place by slowly
adding your weight to the seat. Remain seated for
approximately 10 seconds to fully engage seat into
pneumatic cylinder.
Fig. C
2
3
Fig. D
1
2
BEFORE USE
Before using this product, read the instruction
manual and familiarize yourself thoroughly with
the product and the hazards associated with its
improper use.
Check that the product operates smoothly before
putting into service.
MAINTENANCE INSTRUCTIONS
CAUTION: Check for damaged parts before each use.
Carefully check that the stool will operate properly
and perform its intended function. Replace damaged
or worn parts immediately. Never operate the stool
with a damaged part.
Storage Recommendations
Store the stool when it is not in use. Store it in a dry, secure
place out of the reach of children. Inspect the stool for good
2
into center
working condition prior to storage and before re-use.
3
and
1
on top of the
One Year Limited Warranty
CRAFTSMAN will repair or replace, without charge, any
defects due to faulty materials or workmanship for one year
from the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information, visit
www.craftsman.com or call 1-888-331-4569.
This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by
others. THIS LIMITED WARRANTY IS GIVEN IN LIEU OF
ALL OTHERS, INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, AND EXCLUDES ALL INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
If you are not completely satisfied with the performance
of your CRAFTSMAN Adjustable Rolling Shop Stool for
any reason, you can return it within 90 days from the
date of purchase with a receipt for a full refund – no
questions asked.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-888-331-4569
for a free replacement.
CRAFTSMAN®
is a registered trademark of Stanley Black & Decker, Inc.,
used under license.
© 2019 CRAFTSMAN
U.S. & Canada Only • É.-U. et Canada seulement
Made in China
Product Manufactured by:
JS Products
6445 Montessouri Street, Las Vegas, NV 89113
90 DAY MOnEY BACK gUARAnTEE
English
5
Publicidad
