Descargar Imprimir esta página

Removing The Mask - Philips RESPIRONICS DreamWear Instrucciones De Uso

Ocultar thumbs Ver también para RESPIRONICS DreamWear:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50
Using the Mask
1. Connect the CPAP tubing (included with the CPAP device) to the tubing quick
release on the elbow.
2. Turn the therapy device on. Lie down. Breathe normally.
3. Assume different sleeping positions. Move around until comfortable. If there are
any excessive air leaks, make final adjustments. Some air leaking is normal.
Tubing Quick Release
The elbow is equipped with a tubing quick release. Pull on
the tubing quick release and it will disengage from the
elbow and come loose with the tubing.

Removing the Mask

To keep your adjustments, remove the mask by grasping
the cushion and pulling forward away from the nose. Then
pull the cushion and mask up and off of the head.
5 Mask Care
Cleaning Instructions
Cautions:
• Do not place the headgear or the fabric sleeves into a clothes dryer.
• Any deviation from these instructions may impact the performance of
the product.
• Do not use bleach, alcohol, cleaning solutions containing bleach or alcohol, or
cleaning solutions containing conditioners or moisturizers.
Daily: Hand wash the mask cushion, frame, elbow, and tubing quick release.
Weekly: Hand wash the headgear and the fabric sleeves.
1. Disassemble the mask (see Disassembly section).
2. Submerge and hand wash the mask in warm water with liquid
dishwashing detergent.
Note: Ensure there are no air pockets present inside the mask parts
while submerged.
3. Rinse thoroughly.
4. Lay the headgear and fabric sleeves flat or line dry. Make sure the entire mask is
dry before use.
6

Publicidad

loading