Management - Devolo Magic 1 WiFi 2-1 Manual

adapter, status of the WiFi and Powerline LEDs and
the two operating buttons.

4.7.2Management

System information lets you enter user-defined
names in the Device name (hostname) and
Device location fields. Both pieces of information
are particularly helpful if multiple devolo Magic
Network configuration 46
adapters are to be used and identified in the
network.
Under Change access password, a login password
can be set for accessing the web interface.
By default, the built-in web interface of the
devolo Magic 1 WiFi is not protected by a
password. We recommend assigning a password
when the installation of the devolo Magic 1 WiFi is
complete to protect it against tampering by third
parties.
To do so, enter the desired new password
twice. Now the web interface is protected
against unauthorised access with your cu-
stom password!
In Power Management, you can enable Power-
save mode and Standby
devolo Magic 1 WiFi.
If Powersave mode has been enabled, the
devolo Magic 1 WiFi switches to PowerSave mode
automatically whenever reduced data transmis-
sion over ethernet is detected.
The latency (time for transmitting a data
packet) may be negatively affected.
mode on the
2-1
devolo Magic 1 WiFi