Publicidad
Idiomas disponibles
Idiomas disponibles
Menu Map
Refer to the Intimidator Spot 375ZX product page on
Main Level
Programming Levels
Address
DMX
Slave
RF
Run Mode
Manual
Pan Reverse
Tilt Reverse
Screen Reverse
Pan Angle
Tilt Angle
Setup
Totem Mode
Sensitivity
DMX Loss
Indicator
Flash if DMX
Running Mode
Sys Info
DMX Address
Temperature
Intimidator Spot 375ZX QRG Rev. 1
QUICK REFERENCE GUIDE
001–512
15CH
9CH
Slave1–4
Auto
Sound
RF 1–4
RFP
Pan
Tilt
Color
Gobo
Gobo
Rotate
000–255
Prism
Focus
Zoom
Dimmer
Shutter
OFF
ON
OFF
ON
OFF
ON
540
360
180
270
180
90
OFF
UP
DOWN
001–100
Hold
Black
Auto
Sound
ON
OFF
ON
OFF
RF
Bind
Factory Set
Ver:
V_
_ _ _ _ _ _ _ Displays the current running mode
_ _ _
_ _ _
www.chauvetdj.com
for the latest menu map.
Description
Sets the DMX starting address
Selects DMX mode
Selects Slave mode 1, 2, 3, or 4
Selects Auto mode
Selects Sound-Active mode
Sets the product to work with the RFC-XL remote in group 1, 2, 3, or 4
(RF remote must be bound to the product first)
Sets the product to work with public RF signal
0 to 540°
0 to 270°
Selects color options
Selects gobo options
Rotates gobo
Selects prism and rotation effect
Manual focus control
Manual zoom control
Sets dimmer value
Sets shutter value and strobe effect
Normal pan operation
Reverse pan operation
Normal tilt operation
Reverse tilt operation
Normal display
Reverse display
Selects the 540° pan angle range
Selects the 360° pan angle range
Selects the 180° pan angle range
Selects the 270° tilt angle range
Selects the 180° tilt angle range
Selects the 90° tilt angle range
Does not restrict the pan and tilt motion
Restricts the pan and tilt motion for overhead mounting
Restricts the pan and tilt motion for surface/floor mounting
Sets sound sensitivity
Holds the last setting when signal is lost
Blacks out the product
Sets the unit to Auto mode when signal is lost
Sets the unit to Sound mode when signal is lost
Enables LED indicator
Disables LED indicator
Sets whether the LED indicator flashes when the fixture is
connected to or disconnected from the DMX
Shows instructions on how to bind the RF remote to the product
Loads factory defaults
Displays the software version
Displays the current DMX address
Displays the current product temperature
EN
3
Publicidad
