How to Use
1
5
4
2
Make sure the activation lever is
pulled all the way UP and in the
UNLOCKED position.
NOTES:
• The motor WILL NOT automatically stop or lift the lid when the can has opened.
• Allowing only one rotation reduces or prevents metal slivers.
• When the motor sound shifts to a higher pitch, the can is open. Carefully lift the lid up to remove.
• Can opener has a 24-inch cord. Cord can be stored in the unit by pushing the cord in the small hole on
the back of the unit. To pull the cord out, pull up then out.
NOTE: This can opener cuts the side around the top of the can.
3
Place can against front of can
opener and lift up until rim is
under cutting mechanism.
4
Hold the lever down until the can
has completed ONE ROTATION
ONLY.